Please use this identifier to cite or link to this item:
http://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9199
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mondal, Keya | en_US |
dc.contributor.author | Advani, Kushagra | en_US |
dc.contributor.author | Ghosh, Snigdh | en_US |
dc.contributor.author | Shanmugnathan, Kadhiravan | en_US |
dc.contributor.author | Kulsi, Gouta | en_US |
dc.contributor.author | SIVARAM, SWAMINATHAN | en_US |
dc.contributor.author | Gupta, Sayam Sen | en_US |
dc.date.accessioned | 2024-11-29T04:55:25Z | |
dc.date.available | 2024-11-29T04:55:25Z | |
dc.date.issued | 2024-11 | en_US |
dc.identifier.citation | Journal of Materials Chemistry A | en_US |
dc.identifier.issn | 2050-7496 | en_US |
dc.identifier.uri | https://doi.org/10.1039/D4TA06463A | en_US |
dc.identifier.uri | http://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9199 | |
dc.description.abstract | Transitioning from the fossil fuel era to a sustainable future requires increasing adoption of high-performing renewable materials in industrial applications. Natural polymers derived from lignocellulosic materials are often considered more environmentally friendly than their petroleum-based synthetic analogs. Aeschynomene aspera, commonly known as Shola, has been found to be a large source of amorphous cellulose and a useful sorbent for the removal of oil from water. The Shola pith, the pure white inner stem, is rich in cellulose and has an exquisite three-dimensional and hierarchical porous architecture created by nature. The pith consists of about 70 wt% cellulose as the main chemical component, which is much higher than what is found in other lignocellulosic sources. In addition, the pith has about 12 wt% hemicellulose, 2–3 wt% pectin, 10 wt% lignin, 2.5 wt% wax, and 2 wt% protein as other chemical components. It was observed that water has a high contact angle (135°) on the surface of the pith, while oil droplets instantly spread on the surface, indicating excellent hydrophobic–oleophilic properties. Further studies reveal that the Shola pith exhibits a fast and high sorption capacity of 40–60 g/g for various oils and organic liquids. Silicone oil shows a sorption capacity of about 166 g/g. When applied to oil-floating-over-water, the Shola pith exhibits high selectivity for oil over water; almost all oil on the surface could be removed, leaving no trace of oil on the water surface. The Shola pith can also efficiently separate oil from an oil-in-water emulsion. This behavior is unprecedented in natural sorbents. The used material sorbs a considerable volume of the oil even after the 7th cycle. Furthermore about 95% of sorbed oil could be recovered from the material by solvent extraction. This study reveals for the first time some of the unique and interesting properties of Shola, a widely found biomass native to the eastern parts of the Indian subcontinent, and opens up possibilities of exploiting it for valuable applications. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Royal Society of Chemistry | en_US |
dc.subject | Chemistry | en_US |
dc.subject | 2024 | en_US |
dc.subject | 2024-NOV-WEEK3 | en_US |
dc.subject | TOC-NOV-2024 | en_US |
dc.title | Shola: a 3D porous hydrophobic–oleophilic lignocellulosic material for efficient oil/water separation | en_US |
dc.type | Article | en_US |
dc.contributor.department | Dept. of Chemistry | en_US |
dc.identifier.sourcetitle | Journal of Materials Chemistry A | en_US |
dc.publication.originofpublisher | Foreign | en_US |
Appears in Collections: | JOURNAL ARTICLES |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.