Please use this identifier to cite or link to this item: http://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9384
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJena, Lalit Kumaren_US
dc.contributor.authorChahal, Sumiten_US
dc.contributor.authorSAHOO, SUPRIYAen_US
dc.contributor.authorBOOMISHANKAR, RAMAMOORTHYen_US
dc.contributor.authorAsthana, Saketen_US
dc.date.accessioned2025-02-28T05:28:18Z-
dc.date.available2025-02-28T05:28:18Z-
dc.date.issued2025-01en_US
dc.identifier.citationACS Applied Electronic Materialsen_US
dc.identifier.issn2637-6113en_US
dc.identifier.urihttps://doi.org/10.1021/acsaelm.4c02336en_US
dc.identifier.urihttp://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9384-
dc.description.abstractThe eco-friendly lead-free Ba0.8Sr0.2TiO3 ferroelectrics were synthesized by substituting Ca2+ on the A site via the conventional solid-state sintering method. Ba0.8Sr0.2–xCaxTiO3 (x = 0, 0.06, 0.08) ceramics exhibit tetragonal phase formation, as determined from the X-ray diffraction (XRD) pattern. However, partial incorporation of Ca2+ at the Ti4+ site in BSCT08 was confirmed from XRD and supported by scanning electron microscopy (SEM) analysis. The optimum relaxor nature was observed in BSCT06 with a slimmer P–E loop (Pr = 5.25 μC/cm2). The recoverable energy storage density (Wrec) and electrostrictive coefficient (Q33) of BSCT06 were found to be 0.41 J/cm3 and 0.0223 m4/C2, respectively. The composition BSCT06 was combined with the PVDF polymer via solution casting to fabricate composite thin films for energy harvesting. Characteristic peaks of γ-PVDF with reflections corresponding to the BSCT06 phase were observed from XRD patterns. The composite films demonstrated improved mechanical flexibility through bending and twisting movements; also, the relative permittivity (ε) increased with the addition of the ceramic filler phase in the PVDF matrix. Enhanced breakdown strength (Eb) of 698 kV/cm was found in 10 wt % BSCT/PVDF as compared to BSCT06 ceramic. Wrec of 0.31 J/cm3 with efficiency of 48% was estimated, which strengthened its potential in energy storage applications. Moreover, ceramic-infused PVDF ferro-flexible film was used to fabricate a prototype piezoelectric energy harvester. The highest peak-to-peak voltage of ∼9.3 V and power density of ∼2.86 μW/cm2 were obtained for a device using 20 wt % BSCT/PVDF composite film by application of impact force of known value to show its potential in different energy harvesters and sensor applications.en_US
dc.language.isoenen_US
dc.publisherAmerican Chemical Societyen_US
dc.subjectLead-free relaxoren_US
dc.subjectSolid-state reactionen_US
dc.subjectBSCT/PVDF ferro-flexible compositesen_US
dc.subjectDielectric breakdown strengthen_US
dc.subjectRecoverable energy storageen_US
dc.subjectEnergy harvestingen_US
dc.subject2025-FEB-WEEK1en_US
dc.subjectTOC-FEB-2025en_US
dc.subject2025en_US
dc.titleEnergy Storage and Harvesting Potential of Eco-Friendly Ca-Substituted Ba0.8Sr0.2TiO3/PVDF Ferro-Flexible Composite Filmsen_US
dc.typeArticleen_US
dc.contributor.departmentDept. of Chemistryen_US
dc.identifier.sourcetitleACS Applied Electronic Materialsen_US
dc.publication.originofpublisherForeignen_US
Appears in Collections:JOURNAL ARTICLES

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.