Please use this identifier to cite or link to this item: http://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9502
Title: Design enhancement in hydroxide ion conductivity of viologen-bakelite organic frameworks for a flexible rechargeable zinc-air battery
Authors: RASE, DEEPAK
MANNA, NARUGOPAL
KUSHWAHA, RINKU
JAIN, CHITVAN
SINGH, HIMAN DEV
SHEKHAR, PRAGALBH
SINGH, PIYUSH
SINGH, YASHRAJ KUMAR
VAIDHYANATHAN, RAMANATHAN
Dept. of Chemistry
Keywords: Solid Polymer Electrolytes
Aqueous-Electrolytes
Zn-Air
Triflate
Progress
2024
Issue Date: May-2024
Publisher: Royal Society of Chemistry
Citation: Chemical Science, 15(18), 6949-6957.
Abstract: Quasi-solid-state rechargeable zinc–air batteries (ZABs) are suitable for the generation of portable clean energy due to their high energy and power density, safety, and cost-effectiveness. Compared to the typical alkaline aqueous electrolyte in a ZAB, polymer or gel-based electrolytes can suppress the dissolution of zinc, preventing the precipitation of undesirable irreversible zinc compounds. Their low electronic conductivity minimizes zinc dendrite formation. However, gel electrolytes suffer from capacity fade due to the loss of the volatile solvent, failing to deliver high-energy and high-power ZABs. Consequently, developing polymers with high hydroxide ion conductivity and chemical durability is paramount. We report cationic C–C bonded robust polymers with stoichiometrically controlled mobile hydroxide ions as solid-state hydroxide ion transporters. To boot, we increased the viologen-hydroxide-ion concentration through “by-design” monomers. The polymers constructed with these designer monomers exhibit a commensurate increase in their ionic conductivity. The polymer prepared with 4 OH− ion-containing monomer was superior to the one with 3 OH−. The conductivity increases from 7.30 × 10−4 S cm−1 (30 °C) to 2.96 × 10−3 S cm−1 (30 °C) at 95% RH for IISERP-POF12_OH (2_OH) and IISERP-POF13_OH (3_OH), respectively. A rechargeable ZAB (RZAB) constructed using 3_OH@PVA (polyvinyl alcohol) as the electrolyte membrane and Pt/C + RuO2 catalyst delivers a power density of 158 mW cm−2. In comparison, RZABs with a PVA interlayer provided only 72 mW cm−2. Notably, the device suffered an initial charge–discharge voltage gap of merely 0.55 V at 10 mA cm−2, which increased by only 2 mV after 50 hours of running. The battery operated at 10 mA cm−2 and worked steadily for 67 hours. We accomplished a flexible and rechargeable zinc–air battery (F-RZAB) exhibiting a maximum power density of 79 mW cm−2. This demonstration of a cationic viologen–bakelite polymer-based flexible secondary ZAB with versatile stochiometric hydroxide-ion tunability marks an important achievement in hydroxide-ion conducting solid-state electrolyte development.
URI: https://doi.org/10.1039/D4SC00121D
http://dr.iiserpune.ac.in:8080/xmlui/handle/123456789/9502
ISSN: 2041-6520
2041-6539
Appears in Collections:JOURNAL ARTICLES

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.